- Section 15
-
Base metals and articles of base metal
- 80
-
- 01
-
Unwrought tin
- 02
-
Tin waste and scrap
- 03
-
Tin bars, rods, profiles and wire
- 04
-
Tin plates, sheets and strip, of a thickness exceeding 0.2 mm
- 05
-
Tin foil (whether or not printed or backed with paper, paperboard, plastics or similar..
- 06
-
Tin tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)
- 07
-
Other articles of tin
Section notes
- SECTION XV
NOTES
1. This section does not cover:
(a) Prepared paints, inks or other products with a basis
of metallic flakes or powder (heading nos. 32.07 to
32.10, 32.12,32.13 or 32.15);
(b) Ferro-cerium or other pyrophoric alloys (heading
no.36.06);
(c) Headgear or parts thereof of heading no. 65.06 or
65.07;
(d) Umbrella frames or other articles of heading no.
66.03;
(e) Goods of chapter 71 (for example, precious metal
alloys, base metal clad with precious metal,
imitation jewellery);
(f) Articles of section XVI (machinery, mechanical
appliances and electrical goods);
(g) Assembled railway or tramway track (heading no. 86.08)
or other articles of section XVII (vehicles, ships
and boats, aircraft);
(h) Instruments or apparatus of section XVIII, including
clocks or watch springs;
(ij)Lead shot prepared for ammunitions (heading no. 93.06)
or other articles sextion XIX (arms and ammunitions);
(k) Articles of chapter 94 ( for example, furniture,
mattress support, lamps and lighting fittings,
illuminated signs, prefabricated buildings);
(l) Articles of chapter 95 ( for example, toys, games,
sports requisites);
(m) Hand sieves, buttons, pens, pencil-holders, pen nibs
or other articles of chapter 96 (miscellaneous
manufactured articles); or
(n) Articles of chapter 97 (for example, works of art)
2. Throughout this Nomenclature, the expression "parts of
general use" means;
(a) Articles of heading no. 73.07, 73.12, 73.15, 73.17 or
73.18 and similar articles of other base metal;
(b) Springs and leaves for springs, of base metal, other
than clock or watch springs (heading no. 91.14); and
(c) Articles of heading nos. 83.01, 83.02, 83.08, 83.10
and frames and mirrors, of base metal, of heading no.
83.06.
In chapter 73 to 76 and 78 to 82 (but not in heading no. 73.15) references to parts
of goods do not include references to parts of general use
as defined above.
Subject to the preceding paragraph and to note 1 to chapter 83, the articles of chapter 82
or 83 are excluded from chapter 72 to 76 and 78 to 81.
etc......
Chapter notes
- Chapter 80 - NOTES
1.- In this Chapter the following expressions have the
meanings hereby assigned to them :
(a) Bars and rods
Rolled, extruded, drawn or forged products, not in
coils, which have a uniform solid cross-section along
their whole length in the shape of circles, ovals,
rectangles (including squares), equilateral triangles or
regular convex polygons (including "flattened circles" and
"modified rectangles", of which two opposite sides are
convex arcs, the other two sides being straight, of equal
length and parallel). Products with a rectangular
(including square), triangular or polygonal cross-section
may have corners rounded along their whole length. The
thickness of such products which have a rectangular
(including "modified rectangular") cross-section exceeds
one-tenth of the width. The expression also covers cast
or sintered products, of the same forms and dimensions,
which have been subsequently worked after production
(otherwise than by simple trimming or de-scaling),
provided that they have not thereby assumed the character
of articles or products of other headings.
(b) Profiles
Rolled, extruded, drawn, forged or formed products,
coiled or not, of a uniform cross-section along their
whole length, which do not conform to any of the
definitions of bars, rods, wire, plates, sheets, strip,
foil, tubes or pipes. The expression also covers cast or
sintered products, of the same forms, which have been
subsequently worked after production (otherwise than by
simple trimming or de-scaling), provided that they have
not thereby assumed the character of articles or products
of other headings.
(c) Wire
Rolled, extruded or drawn products, in coils, which have
a uniform solid cross-section along their whole length in
the shape of circles, ovals, rectangles (including
squares), equilateral triangles or regular convex polygons
(including "flattened circles" and "modified rectangles",
of which two opposite sides are convex arcs, the other two
sides being straight, of equal length and parallel).
Products with a rectangular (including square), triangular
or polygonal cross-section may have corners rounded along
their whole length. The thickness of such products which
have a rectangular (including "modified rectangular")
cross-section exceeds one-tenth of the width.
(d) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought
products of heading No. 80.01), coiled or not, of solid
rectangular (other than square) cross-section with or
without rounded corners (including "modified rectangles"
of which two opposite sides are convex arcs, the other two
sides being straight, of equal length and parallel) of a
uniform thickness, which are :
- of rectangular (including square) shape with a
thickness not exceeding one-tenth of the width,
- of a shape other than rectangular or square, of any
size, provided that they do not assume the character of
articles or products of other headings.
Headings Nos. 80.04 and 80.05 apply, inter alia, to
plates, sheets, strip and foil with patterns (for example,
grooves, ribs, chequers, tears, buttons, lozenges) and to
such products which have been perforated, corrugated,
polished or coated, provided that they do not thereby
assume the character of articles or products of other
headings.
(e) Tubes and pipes
Hollow products, coiled or not, which have a uniform
cross-section with only one enclosed void along their
whole length in the shape of circles, ovals, rectangles
(including squares), equilateral triangles or regular
convex polygons, and which have a uniform wall thickness.
etc...